产品中心

PRODUCT

点击查看前一组产品
  • 点击查看 点击查看 点击查看 点击查看 点击查看
  • 点击查看 点击查看 点击查看 点击查看 点击查看
  • 点击查看 点击查看 点击查看 点击查看 点击查看
  • 点击查看 点击查看 点击查看 点击查看 点击查看
  • 点击查看 点击查看 点击查看 点击查看 点击查看
  • 点击查看 点击查看 点击查看 点击查看 点击查看
  • 点击查看 点击查看 点击查看 点击查看 点击查看
  • 点击查看 点击查看 点击查看 点击查看 点击查看
  • 点击查看 点击查看 点击查看 点击查看 点击查看
  • 点击查看
点击查看后一组产品
  • 产品编号:341525516
  • 产品名称:杀菌剂
  • 产品售价:¥0
  • 所属分类: 油田助剂
  • 添加日期:2019-03-04 15:25:05
  • 浏览次数:4096
产品介绍


杀菌剂SJ-2

一、产品简介:

本产品为新型改性聚胍类高效广谱杀菌剂,在水溶液中能产生电离,它的亲水基部分含有强烈的正电性,吸附通常呈负电性的各类细菌、病毒,进入细胞膜,抑制膜内脂质体合成,造成菌体凋亡,达到最佳的杀菌效果。本品具有低毒、可降解、抑菌浓度低、不产生耐药性等特点。可广泛应用于日用化学工业、水处理、医疗卫生、油田酸化压裂和联合站等领域,对于硫酸盐还原菌、腐生菌、铁细菌均有强的杀灭效果,同时对霉菌、藻类等有很强的杀灭及抑制效果。

二、技术指标:

1杀菌剂SJ-2技术指标

技术指标

无色至淡黄色透明液体

pH

6-9

有效含量,%

40

三、  使用方法:

1. 建议使用量:30-50mg/L。本产品为高含量原液,用于酸化压裂推荐稀释比例为1:2-1:3,用于联合站推荐稀释比例为1:2-1:1;

2. 其他领域使用可根据实际情况进行一定比例的水稀释。

3. 按比例加入工作液中,循环均匀即可。

四、包装贮运:

1. 包装:采用200kg塑料桶包装,也可按用户要求包装。

2. 贮存:贮存于阴凉处、通风处,有效期1年。

 

五、操作注意事项

一、   操作人员应穿戴乳胶手套及防护眼镜等防护品。操作过程注意通风。

二、   如遇本物触及皮肤时可用大量水冲洗后再用肥皂洗净即可;如遇本物品溅入眼睛请在现场立即用水充分清洗之后立即就医检查。

三、   如遇火灾,可用干粉、泡沫、CO2 等灭火器以及黄砂灭火。

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fungicide SJ – 2

I.           Product introduction

This product is a new type of modified polyguanides with high efficiency and wide spectrum fungicide, which can produce ionization in aqueous solution. Its hydrophilic part contains strong positive electricity, which can absorb all kinds of bacteria and viruses with negative electricity, enter the cell membrane, inhibit the synthesis of liposomes in the membrane, cause the apoptosis of bacteria, and achieve the best bactericidal effect.This product has the characteristics of low toxicity, degradable, low concentration of bacteriostasis and no drug resistance.It can be widely used in the fields of daily chemical industry, water treatment, crude oil pipeline transportation, oil field acidification fracturing and joint station, etc. It has strong killing effect on sulfate reducing bacteria, saprophytic bacteria and iron bacteria, and strong killing and inhibiting effect on mold and algae.

Ii. Technical indicators

Item

Technical indicators

Outside view

Colorless to pale yellow transparent liquid

pH

6-9

Effective content%

40

Iii. Method of use

1. Recommended dosage: 30-50mg/L.This product is a high-content original solution, and the recommended dilution ratio for acidizing fracturing is 1:2-1:3, and the recommended dilution ratio for combined stations is 1:2-1:1.

2. In other fields, a certain proportion of water can be diluted according to the actual situation.

3. Add it to the working fluid in proportion and circulate evenly.

Ⅳ. Packaging, storage and transportation

1. Packaging: it is packaged in 200kg plastic barrels, or according to the requirements of users.

2. Storage: stored in a cool and ventilated place, valid for 1 year.

V. matters needing attention in operation

1. Operators should wear latex gloves, protective glasses and other protective products.Pay attention to ventilation during operation.

2. If the product touches the skin, rinse with plenty of water before washing with soap.In case of eye splash, please wash the product with water immediately and seek medical advice immediately.

3.In case of fire, dry powder, foam, CO2 and yellow sand fire extinguishers can be used.

 



点击数:4096  录入时间:2019-03-04 【打印此页】 【关闭