油溶缓蚀剂HY-10

缓蚀剂介绍

油溶缓蚀剂HY-10是由多种成膜有机胺和其他复配物复合而成，此型号是原剂。

HY-10特有的五元含氮杂环能以静电引力和大π键形式吸附在金属表面。一方面改变金属表面的电荷分布和界面性质，使金属表面的能量状态趋于稳定化，减低腐蚀反应；另一方面由于非极性基团紧密排列在金属表面形成一层疏水膜，使腐蚀反应得到抑制；同时它在金属表面可以改变氢离子的氧化还原电位，也可以络合溶液中的某些氧化剂，减低电位达到缓蚀的目的。HY-10含有沉淀成膜组分，能够及时修复由冲刷等原因造成的膜损伤。整体表现为成膜牢固，缓蚀优异。

HY-10具有缓蚀率高、使用量少、耐高温、环境友好、应用广泛等特点。

油田油气管线输送使用广泛；

炼油厂各装置：常减压系统、催化裂化系统、焦化加氢系统等使用广泛。

 

HY-10性能指标

 

Item	Targeted Value
Appearance	Reddish brown liquid
Density（25℃）g/cm3	0.95 ~ 1.05
PH（1%water solution）	7~9
Dispersity	Soluble in oil
Flash point	>61℃
Condensation point	<-8℃
Main ingredients	≥99%

使用方法

1.可原液注入或用溶剂油均匀稀释后注入。

2.按系统处理量的5-10ppm注入；前期注入量为正常期的2-4倍，三天后每天依次按3ppm的速度递减至正常使用量。

3.本剂冬天使用时，可适当用蒸汽加热。

包装与储存

1.     200L塑料桶，IBC桶

2.     宜放置阴凉通风处。不可靠近明火、酸碱类和氧化剂类化工品。

 

操作注意事项

3.     操作人员应穿戴乳胶手套及防护眼镜等防护品。

4.     如遇本物触及皮肤时可用大量水冲洗后再用肥皂洗净即可；如遇本物品溅入眼睛请在现场立即用水充分清洗之后立即就医检查。

5.     如遇火灾，可用干粉、泡沫、CO2 等灭火器以及黄砂灭火。

 Oil Soluble Corrosion Inhibitor HY-10

About HY-10

The oil-soluble corrosion inhibitor HY-10 is composed of a variety of film-forming organic amines and other complex compounds. This model is the original agent. 

The HY-10's unique five-yuan nitrogenous heterocycles will adhere to the metal surface in the form of electrostatic attraction and large PI bonds.On the one hand, the charge distribution and interface properties of the metal surface are changed to stabilize the energy state of the metal surface and reduce the corrosion reaction.On the other hand, the non-polar groups are closely arranged on the metal surface to form a hydrophobic film, which inhibits the corrosion reaction.At the same time, it can change the REDOX potential of hydrogen ions on the metal surface, and can also complexate some oxidants in the solution to reduce the potential for corrosion inhibition.HY-10 contains precipitated film forming components, which can timely repair film damage caused by erosion and other reasons.The overall performance of the film is firm,

HY-10 has the characteristics of high corrosion inhibition rate, low consumption, high temperature resistance, environmental friendliness and wide application.

Oil and gas pipelines are widely used in oil fields.

Refinery equipment: atmospheric and vacuum pressure system, catalytic cracking system, coking hydrogenation system and other widely used.

HY-10 Performance Index

Items	Targeted Value
Appearance	Reddish brown liquid
Density（25℃）g/cm3	0.95 ~ 1.05
Dispersity	Soluble in oil
Flash point	>61℃
Condensation point	<-8℃
Matter content	≥95%

How to use

1. It can be injected with the original liquid or uniformly diluted with solvent oil.

2. 5-10ppm injection according to the system processing capacity;The amount of injection in the early stage was 2-4 times of that in the normal stage, and then decreased to the normal usage at the rate of 3ppm every day after 3 days.

Packaging & amp; storage

1. 200L plastic barrel, IBC ton barrel.

2. It is advisable to place a cool and ventilated place. Not close to open fire, acid and alkali and oxidizer chemicals.

Operational considerations

1. Operators should wear latex gloves and protective glasses and other protective products.

2. If the object touches the skin when you can rinse with a lot of water and then wash it with soap, if this item splashes into the eyes, please immediately after the use of water in the site to fully clean the medical examination.

3. In case of fire, can be used dry powder, foam, CO-----2 and other fire extinguishers and yellow sand fire extinguishing.